PRODUCTO ORIGINAL
ENVÍOS 24 H
PAGO SEGURO
PRODUCT INFORMATION
The ME Sport unit (with BB capture system) of the aluminum CNC jumping chamber is made precisely to improve accuracy and ensure a uniform air seal for the Tokyo Marui standard AEG series (includes KRYTAC and KWA) M4 / M16 .
The Hopup Chamber ME unit has a precision rotating disc design for fine jump settings, it also redesigned the levers and concave protrusions to work better with R-hop and Standard-Hop to keep BB shots straight and accurate every shot.
The Hopup Chamber ME unit is designed to accept the length of the nozzle from 21.00 mm to 21.25 mm, and is fully compatible with most soft and hard rubber rivets in the secondary market without losing SPF or dropping ammunition.
The ME Hop housing of the Hopup camera is equipped with a new CNC design Delrin Locking C-Clip to hold the barrel without wobbling or twisting, and 3 compression springs in the upper part, in the lower part and in the center of the housing to ensure that the jump unit is exactly centered, straight and air tight at all times when it fits into any V2 gearbox with 11mm or 11.5mm internal hole.
More than that, the Hopup Chamber ME Sport unit is specially designed with BB Catching System to avoid falling BBs after removing the charger.
*** The UV LED Boards and Dual Game Module and the Board only LED UV w / cover for the module assembly and are optional complements to shine BBs in the dark. Operating voltage of 7VDC - 15VDC (2-4 LiPo cells, 6-13 NiCad cells). (Sold separately)
*** The empty magazine sensing sensor and electronic switch controller are optional add-ons to stop engine / HPA ignition when the magazine is empty. (Sold separately)
*** Test results: FPS could increase from 10FPS to 30FPS in the stock configuration. Please check your FPS!
It includes
1 CNC Aluminum Hopup Chamber ME Sport (with BB Catching System)
2 x clear transparent vinyl cover set
1 x CNC aluminum standard jump arm
1 x Aluminum CNC R-Hop Arm
1 x Standard-Hop Nub Damper silicone rubber
1 x R-Hop Nub Damper silicone rubber
1 x CNC Aluminum 4.5 mm length Accuracy R-Hop concave Nub
1 x CNC Aluminum 6 mm in length Accuracy R-Hop concave Nub
1 x CNC brass threaded slot pin
1 x CNC Delrin Locking C-Clip
1 x CNC Brass spacer barrel
1 x Oring Brass Oring Spacer
3 x steel compression spring
Specification
Total length: 51 mm
Total height: 37.75mm
Outer diameter of the hub (to fit in the gearbox): min. 11 mm - max. 11.5 mm
External diameter of the hub (to fit the external cylinder): minimum 12 mm
Internal diameter of the hub (to adapt to the nozzle): max. 8.3 mm
Outside diameter of the feeder (to fit the magazine): minimum 9.25 mm
Feeder length (to fit the magazine): max. 6.25 mm
Material: Aluminum 6061
Castellano
English
French